34 Products Found

HM-TOS MID-MATIC TIP 100 PSI 1.5" NH (38mm) Automatic nozzle for use with separate valve or valved playpipe. Full automatic 100 psi (7 bar) pressure control with a flow capacity of 70-200 gpm (260-760 l/min). Includes flush without shutting down, and "Gasket Grabber" inlet screen. Lightweight hardcoat anodized aluminum for maximum resistance to corrosion and wear. Tip does not shut off and must be used with a separate valve or valved playpipe. 1.5" NH (38mm) rigid rocker lug-coupling is standard.   HM-VPGI-52MM MID-MATIC W/GRIP 52MM STORZ   HMK-V LOW PRESSURE 55 PSI VERSION. Same as HM-V above, but operates at a lower pressure of approximately 55 psi (4 bar). Flow range is 70-180 gpm (260-680 l/min). Not FM Approved   HML-VPGI LOW PRESSURE 75 PSI VERSION Same as HM-VPGI above, but operates at a lower pressure of approximately 75 psi (5 bar). Flow range is 70-200 gpm (260-760 l/min). Not FM Approved   HMP20-109 MID-MATIC FO6 W/GRIP 2.5"BIC   HM-VPGI-38MM MID-MATIC W/GRIP 38MM STORZ   HMP20-108 MID-MATIC FO6 W/GRIP 1.5"BSP   HM-VPGIS MID-MATIC W/GRIP1.5" NH (38mm) Automatic pressure control with a flow capacity of 70-200 gpm (260-760 l/min). Includes flush without shutting down, patented slide-type valve for turbulence-free flow control, six detent flow positions, and "Gasket Grabber" inlet screen. Lightweight hardcoat anodized aluminum for maximum resistance to corrosion and wear. Pistol grip is mounted below the valve. 1.5" NH (38mm) full-time swivel rocker lug coupling is standard.   HML-STO LOW PRESSURE 75 PSI VERSION. Same as HM-STO above, but operates at a lower pressure of approximately 75 psi (5 bar). Flow range is 70-200 gpm (260-760 l/min). Not FM Approved   HM-STOS MID-MATIC TIP/TWIST-OFF 100 PSI 1.5" NH (38mm) Automatic pressure control with a flow capacity of 70-200 gpm (260-760 l/min). Includes patented twist slide-type valve for turbulence-free flow control, flush without shutting down, and "Gasket Grabber" inlet screen. Lightweight hardcoat anodized aluminum for maximum resistance to corrosion and wear. 1.5" NH (38mm) rigid rocker lug coupling is standard. May be used with a separate valve or playpipe. Ideal for break-and-extend operations. 1.5" NH (38mm) rigid rocker lug coupling is standard.   HMK-STO LOW PRESSURE 55 PSI VERSION. Same as HM-STO above, but operates at a lower pressure of approximately 55 psi (4 bar). Flow range is 70-180 gpm (260-680 l/min). Not FM Approved   MEFK-001 METRO ETHANOL FOAM KIT PACKAGE   HMK-STOS LOW PRESSURE 55 PSI VERSION. Same as HM-STO above, but operates at a lower pressure of approximately 55 psi (3 bar). Flow range is 70-180 gpm (260-680 l/min).   HML-V LOW PRESSURE 75 PSI VERSION. Same as HM-V above, but operates at a lower pressure of approximately 75 psi (5 bar). Flow range is 70-200 gpm (260-760 l/min) Not FM Approved.   HML-TO LOW PRESSURE 75 PSI VERSION. Same as HM-TO above, but operates at a lower pressure of approximately 75 psi (5 bar). Flow range is 70-200 gpm (260-760 l/min). Not FM Approved   HML-VS LOW PRESSURE VERSION. Same as HM-V above, but operates at a lower pressure of approximately 75 psi (5 bar). Flow range is 70-200 gpm (260-760 l/min).   HM-VPGI-BIC MID-MATIC W/GRIP 2.5"BIC MALE INLET   HMK-TOS LOW PRESSURE 55 PSI VERSION. Same as HM-TO above, but operates at a lower pressure of approximately 55 psi (3 bar). Flow range is 70-180 gpm (260-680 l/min).   HML-STOS LOW PRESSURE 75 PSI VERSION. Same as HM-STO above, but operates at a lower pressure of approximately 75 psi (5 bar). Flow range is 70-200 gpm (260-760 l/min).   HM-VPGI-BJ MID-MATIC W/GRIP 2.5"BSP MALE THREADS   HM-VPGI-BSP MID-MATIC W/GRIP 1.5"BSP   HM-VPGIS38MM MID-MATIC W/GRIP 38MM - SPINNING TEETH   HM-TO MID-MATIC TIP 100 PSI 1.5" NH (38mm) Automatic nozzle for use with separate valve or valved playpipe. Full automatic 100 psi (7 bar) pressure control with a flow capacity of 70-200 gpm (260-760 l/min). Includes flush without shutting down, and lightweight hard coat anodized aluminum for maximum resistance to corrosion and wear. Tip does not shut off and must be used with a separate valve or valved playpipe. 1.5" NH (38mm) rigid rocker lug-coupling is standard. FM Approved   HML-TOS LOW PRESSURE 75 PSI VERSION. Same as HM-TO above, but operates at a lower pressure of approximately 75 psi (5 bar). Flow range is 70-200 gpm (260-680 l/min).   HM-VPGI-65MM MID-MATIC W/GRIP 65MM STORZ   HM-VS MID-MATIC NOZZLE 100 PSI 1.5" NH (38mm) Automatic with a flow capacity of 70-200 gpm (260-760 l/min). Includes flush without shutting down, patented slide-type valve for turbulence-free flow control, six detent flow positions, and "Gasket Grabber" inlet screen. Lightweight hardcoat anodized aluminum for maximum resistance to corrosion and wear. Rocker lug 1.5" NH (38mm) full-time swivel coupling is standard.   HMK-VPGIS LOW PRESSURE 55 PSI VERSION. Same as HM-VPGI above, but operates at a lower pressure of approximately 55 psi (3 bar). Flow range is 70-180 gpm (260-680 l/min).   HML-VPGIS LOW PRESSURE 75 PSI VERSION Same as HM-VPGI above, but operates at a lower pressure of approximately 75 psi (5 bar). Flow range is 70-200 gpm (260-760 l/min).   HMK-VPGI LOW PRESSURE 55 PSI VERSION. Same as HM-VPGI above, but operates at a lower pressure of approximately 55 psi (4 bar). Flow range is 70-180 gpm (260-680 l/min). Not FM Approved   HM-STO MID-MATIC TIP/TWIST-OFF 100 PSI 1.5" NH (38mm) Automatic pressure control with a flow capacity of 70-200 gpm (260-760 l/min). Includes patented twist slide-type valve for turbulence-free flow control, flush without shutting down and is lightweight hard coat anodized aluminum for maximum resistance to corrosion and wear. 1.5" NH (38mm) rigid rocker lug coupling is standard. May be used with a separate valve or playpipe. Ideal for break-and-extend operations. 1.5" NH (38mm) rigid rocker lug coupling is standard. FM Approved   HM-VPGI MID-MATIC W/GRIP1.5" NH (38mm) Automatic pressure control with a flow capacity of 70-200 gpm (260-760 l/min). Includes flush without shutting down, patented slide-type valve for turbulence-free flow control, six detent flow positions, and "Gasket Grabber" inlet screen. Lightweight hard coat anodized aluminum for maximum resistance to corrosion and wear. Pistol grip is mounted below the valve. 1.5" NH (38mm) full-time swivel rocker lug coupling is standard. FM Approved   HMK-VS LOW PRESSURE 55 PSI VERSION. Same as HM-V above, but operates at a lower pressure of approximately 55 psi (3 bar). Flow range is 70-180 gpm (260-680 l/min).   HM-V MID-MATIC NOZZLE 100 PSI 1.5" NH (38mm) Automatic with a flow capacity of 70-200 gpm (260-760 l/min). Includes flush without shutting down, patented slide-type valve for turbulence-free flow control, six detent flow positions, and "Gasket Grabber" inlet screen. Lightweight hard coat anodized aluminum for maximum resistance to corrosion and wear. Rocker lug 1.5" NH (38mm) full-time swivel coupling is standard. FM Approved   HMK-TO LOW PRESSURE 55 PSI VERSION. Same as HM-TO above, but operates at a lower pressure of approximately 55 psi (4 bar). Flow range is 70-180 gpm (260-680 l/min). Not FM Approved